Soldering Systems
Soldering Irons
Automatic Solder Feeders
Soldering Testers/Tip Thermometers
Solder Pots
Surface-Mounts/SMT Products
Desoldering Products
Soldering Accessories
Soldering Work Materials
Heated Tools
Hand Tools
ANTI-STATIC MAT 2m
WD-13
Suitable for assembly rooms (for IC or electrical components) to prevent static charge.
| Package Contents |
|---|
Option
How To Use WD-1G Desk Mat (Ground Wire Set)
Make a 10mm hole in the mat.
Place the connector plate under the hole in the mat. Secure the connector using the screw.
Connect the grounding cord to the connector on the mat.
The banana strap used with the WS-11/12 can also be connected to the connector on the mat.
Elastic & scissible rubber sheet.
Matte green. Available for work desks and floors.
Double structure: static-diffusion layer (green) 0.5mm & conductive layer (black) 1.5mm.
Product Specifications
| Model | Length | Width | Thickness | Material/Hardness | Surface Resistivity | |
|---|---|---|---|---|---|---|
| Surface (green) | Bottom (black) | |||||
| WD-130 | 10m | 1m | 2mm | Synthetic Rubber/65 | 107 –109Ω/sq | 103–105Ω/sq |
| WD-13 | 2m | |||||
OPTION
| Item | Model | Specifications |
|---|---|---|
| Ground Wire Plate | WD-1E | 50×100mm/2 pieces / 2m cords |
| Short Plate | WD-1P | 50×100mm/10 pieces |
| Aluminum Tape | WD-3020 | 0.05mm (T) x 30mm (W) x20m (L) |
Tip Cleaners
Soldering Iron Stands
Solder Reel Holders
Clamps/Holders
Wrist Straps
Heat Clips
Low-Dust Gloves
Surface Resistivity Meters
Anti-Static Mats
Air Purifying Type Fume Vacuums