Soldering Systems
Soldering Irons
Automatic Solder Feeders
Soldering Testers/Tip Thermometers
Solder Pots
Surface-Mounts/SMT Products
Desoldering Products
Soldering Accessories
Soldering Work Materials
Heated Tools
Hand Tools
HB-80
For Hobby or DIY
| 学納価 | ¥2,090(税込) |
|---|---|
| 必要な工具 | Hot Sticks 4pcs (Approx. ø11 x 100 mm), Wire Stand |
For Hobby or DIY
It can be used for a wide of range purposes from interior decoration and display to cardboard packaging.
Glue things easily.
Many uses!
Easy operation! Hobby/Industrial use. Load the gun with “hot stick” glue. The gun melts the glue.
Built-in Safety Fuse
Built-in “Safety Fuse” prevents instantaneous overcurrent to the heater.
How to Replace the Nozzle
1. Turn over the rubber part of the nozzle to expose the nut. 2. Loosen the hexagonal nut with a wrench, and remove the nozzle. *If you have used this unit before, the screw part will be hardened from glue, so please heat it up to soften the glue. Be careful not to burn yourself on the nut and nozzle after heating because they will be hot. 3. Attach the new nozzle, and tighten the screw with a wrench.
仕様
| MODEL | HB-80 |
|---|---|
| Voltage | 110–240V AC 50 / 60Hz |
| Power Consumption | 14W |
| Nozzle Temp. | 160˚C |
| Heater | PTC Heater |
| Power Cord Length | 1.4m |
| Dimensions | 185(W) x 155(H) mm |
| Weight | 220ｇ |
| Accessories | Hot Sticks 4pcs (ø11 x 100mm), Wire Stand |
